TE70XP & TE77XP Semi-Dry Transfer Units with Built-In Power Supply
Electrotransfers proteins from polyacrylamide gels onto membranes (either nitrocellulose or PVDF) rapidly and efficiently. Unique design includes an intelligent built-in power supply which automatically monitors the transfer status, stopping the transfer before the stack overheats.
The Semi-Dry Transfer Units support as many as two layers of gels being transferred simultaneously. The TE70XP has a 14 x 16 cm maximum transfer area which can handle up to four mini gels using the stacked format. The TE77XP has a 21 x 26 cm transfer area for a capacity of up to 12 mini gels at one time.
Also available:
The TE70XP and TE77XP semi-dry transfer units electrotransfer proteins from polyacrylamide gels onto membranes (either nitrocellulose or PVDF) rapidly and efficiently. Their unique design includes an intelligent built-in power supply which automatically monitors the transfer status, stopping the transfer before the stack overheats.
Features & Benefits:
- Intelligent built-in power supply—prevents the stack from overheating by monitoring the transfer status
- Requires minimal current—does not generate excessive heat that can dry out the transfer stack and halt transfer or damage transfer units
- Durable iridium oxide and stainless steel electrodes—allow for contamination free, consistent transfer
- Vented electrodes—prevent build up of bubbles which may impair transfer
- Minimal buffer requirements—reagent cost and preparation time are reduced
All units have:
- Molded Base with Platinum-Coated Titanium Anode and Internal Power Supply
- Hinged Lid with Stainless Steel Cathode
The TE70XP includes:
- Blotting Paper (14 x 16 cm), 25 sheets
- Porous Cellophane (20 x 35.5 cm), 50 sheets
- Mylar® Masks (16.5 x 18.5 cm), 2 pcs
The TE77XP includes:
- Blotting Paper (21 x 26 cm), 25 sheets
- Porous Cellophane (20 x 35.5 cm), 50 sheets
- Mylar® Masks (23 x 27.5 cm), 2 pcs
| Transfer Area | |
| TE70XP | Up to 14 x 16 cm |
| TE77XP | Up to 21 x 26 cm |
| Maximum Power Settings | 30 V, 500 mA, 15 W |
| Maximum Temperature | 45°C |
| Indoor Use | 4 to 40°C |
| Humidity | Up to 80% |
| Unit Dimensions (W x H x D) | 38 x 46 x 9 cm |
User's Manual